쿠폰적용은 주문서 작성시 적용할 수 있습니다.
상품 정보 | 가격 | 삭제 |
---|
할인가가 적용된 최종 결제예정금액은 주문 시 확인할 수 있습니다.
LVI2는 31.7AD 어뎁터와 6mm 파포컬 아이피스를 기본 제공하고 있습니다.
LVI SmartGuider 2 Imaging Control System The LVI SmartGuider 2 Imaging Control System goes beyond the simple concept of autoguiding.
Astrophotographers know well that autoguiding is vital for obtaining clear and crisp long-exposure photos with pinpoint star resolution, but that's not all.
Final images are the result of a complex process handled by different devices which must all work together flawlessly in order to get the desired photo quality. But in most of cases, the process isn't flawless.
The LVI SmartGuider 2 Imaging Control System is an integrated solution which does the whole process required to make wonderful astrophotos in a very short time and in a fun and easy way! No longer do you need the laptop, the reflex remote switch, the focuser control box and other gadgets in the field: the elusive beauty of the Universe will now just be a few clicks away from your dreams!
THE NEW MGA DEVICE
The LVI SmartGuider 2 Imaging Control System comes with the special MGA device which takes the full control of your imaging equipment (mount, DSLR, focuser) to deliver the best result out of your telescope.
Advanced control of REFLEX cameras
The REFLEX section managed by MGA device takes control of Canon, Nikon, Pentax and Sony cameras by programming these same parameters usually controlled by dedicated and “not-for-free” software running on PCs:
1. Exposure with single shots.
2. Bracketing. When switched on, the camera automatically takes a new sequence with an exposure as shorter as the stop down set.
3. Number of shots.
4. Pause between consecutive shots for sensor cooling.
5. Mirror lock-up to avoid vibrations caused by the mirror flip prior the shutter release.
6. Dark framing. When switched on, the camera automatically takes a new sequence with the set number of dark frames after the telescope has been capped.
7. Delayed start. When switched on, the camera starts to capture images after the set time has expired.
8. Statistical info. Two windows with all parameters displayed.
Advanced control of Focusers
The FOCUSER section managed by MGA device takes control of any focuser of any size equipped with a stepping motor. Baader Steeltrack and Starlight FeatherTouch focusers are in the internal SmartGuider 2 database already. The MGA is supplies power to the motor through 3xAA batteries placed inside the MGA unit.
The MGA can control following parameters:
1. Focuser model selection from an internal database.
2. Automatic calibration for absolute positioning.
3. Temperature compensation with an external thermo probe.
4. Temperature coefficient self-learning in an automatic way.
5. Permanent saving of one T coefficient.
6. Manual adjustment of the T coefficient.
7. Statistical info with parameters.
AUTOSTAR and LOSMANDY autoguiding도 가능하게 되었습니다.
The new autoguiding port in the MGA unit features an opto-isolated plug and non-simultaneous corrections to the RA and DEC axes useful to get a perfect autoguiding also with the old Losmandy #492 digital drive.
Furthermore, the dedicated AUTOSTAR plug makes the autoguiding possible also through all Meade mounts with Autostar #497 (LX90 and LXD55/75) as never before!
MORE FLEXIBILITY AND MORE PRECISE AUTOGUIDING
The LVI SmartGuider 2 Imaging Control System allows better control over more useful parameters to achieve the best results in any condition.
New options are:
1. PULSE GUIDE - sets the duration of the corrective pulse.
Together with the AGGRESSIVENESS, this parameter helps in better tuning the right correction to the mount, avoiding dangerous overcorrections.
2. MAX EXPOSURE – sets the max exposure limit.
The camera sensitivity can be pushed further, up to +1 limiting magnitude.
3. DITHERING - allows a small framing displacement among Reflex single shots when activated. This will remove cold pixels (black "holes" in the raw images) out of the final image when dark frames are removed and the subject is perfectly stationary in the same portion of the sensor.
4. THRESHOLD - allows for hot pixel removal by adjusting the background noise level. Pixels having an ADU value lower than threshold value are not considered by SmartGuider 2 camera while searching for a guide star. This avoids hot pixels being considered as fake stars.
The LVI SmartGuider 2 Imaging Control System camera comes with all the accessories listed below:
제품 성능 향상을 위하여 디자인은 예고없이 변경될 수 있습니다.
상품명 | [정품] LVI-SmartGuider2 |
---|---|
상품코드 | P0000NRW |
상품요약정보 | Made in Italy. 완역 한글메뉴얼에 팁 메뉴얼까지 완벽하게 제공합니다. LVI보다 한층 막강해진 LVI2. 오토가이드는 물론이고 DSLR과 전동 포커서까지 모두 콘트롤이 가능해졌습니다. LVI에서 지원이 안되었던 미드 LXD75와 로즈만디 적도의까지 모두 오토가이드 가능합니다. |
소비자가 | |
판매가 | 590,000원 |
국내·해외배송 | 국내배송 |
배송방법 | 택배 |
배송비 | 5,000원 (80,000원 이상 구매 시 무료) |
- 광학기기는 희귀품이고, 시장성이 적어 변심에 의한 반품, 취소는 어떠한 경우라도 불가합니다.
- 주문제작 및 수입 주문품인 경우는 엑소스카이의 동의없이 주문 취소하거나 다른 제품으로 교환할 수 없으며, 계약금은 환불되지 않습니다. .
- 한번 사용해 보고 반품하겠다는 생각을 가지신 분은 절대 주문하지 마십시오. 광학제품은 해당이 안되기 때문에 절대 환불되지 않습니다.
- 반품을 원하시는 분은 절대 택배 박스를 개봉하지 말고 바로 택배기사님에게 반송해 주세요. .
- 제품의 색상은 모니터와 컴퓨터 사양에 따라 다를 수 있으므로 교환 및 반품의 사유가 되지 않습니다.
- 제품 성능 향상을 위하여 예고 없이 디자인이 변경될 수 있습니다. 그로 인한 교환 및 반품의 사유가 되지 않습니다.
- 아래 같은 경우라면 절대 교환, 반품, 취소되지 않습니다. 다시 한 번 확인해 주십시오.
1. 상품을 이미 사용하였거나 상품 자체가 훼손된 경우, 소모품 구성이 개봉, 사용된 경우
2. 밀봉포장 개봉 또는 외부포장을 훼손하여 사용 가치가 떨어진 경우
3. 상품설명에 기재한 사용시 주의사항을 지키지 않아 파손된 경우 (고객님의 과실 포함)
4. 상품의 구성품중 일부가 누락되거나 파손된 경우, 상품탭(Tab)및 외부포장재가 파손, 분실된 경우
5. 배달 후 설치가 완료된 경우
6. 엑소스카이 매장 방문해서 구매하고나, 온라인 주문 후 매장 방문해서 수령한 경우
7. 반품과 교환 과정에서 제품박스에 낙서(반품 또는 반송. 주소 등을 표기하는 모든 행위)한 경우
택배 기사님에게 택배박스 절대로 낙서하지 말라고 해 주세요. 낙서에 대한 모든 책임은 고객님에게 있습니다.
8. 다른 사용자에게 재 판매할 수 없도록 만든 모든 행위
교환 및 반품 주소
- 부천시 원미구 조마루로385번길 122 삼보테크노타워 2707호 엑소스카이
- 본사 동의 후에 반품과 교환이 가능하며, 당사가 지정한 택배를 이용하지 않는 경우 배송비는 고객님이 지불해야 합니다.
190,000원
210,000원
320,000원
70,000원
40,000원
40,000원
[정품] 바더 RCC (Rowe Coma Corrector)
534,000원
2. [정품] 바더 RCC Off Axis Guider
417,000원